Chainsaw Chain Direction | What Is The Correct Way?

Table of Contents

Don’t know the correct way of chainsaw chain direction? Want a guide to putting the chain of a chainsaw?

If your answer is yes, then this post is for you!

The unwanted thing that can occur while starting a project using a chainsaw is to put the chain in the wrong direction, which can block your project in the middle. Chainsaw chain direction is one of the main factors that keep in mind using a chainsaw.

For proper functioning of chainsaws, always keeping the chains on the chainsaw in the right way is an important step. The tool can be dangerous if used and maintained not in proper manners. Furthermore, always make sure that the direction of the chainsaw is the right way before using the chainsaw for your safety. Keep the chainsaw clean and maintained to ensure it is working efficiently.

Wanted more guidance? Then keep on reading. I’ll explain the directions and when to replace the chain.

This video surely helps you while putting the chain on the chainsaw after cleaning.

The main sign of a worn chain is when you cannot cut with it as easily as you used to. Replace your chainsaw parts timely rather than sharpen them because as you sharpen its parts, they become smaller during sharpening. Any chain with a large tooth is better suited to professional users. Choosing a chain with a humped drive is always a wise idea.

So, let’s dive in-depth.

Chainsaw Chain Direction: Direction Facts

What is the correct chainsaw chain direction? Why does it matter a lot?

It is too difficult for people who do not know about chainsaw chain direction and get confused. There are cutting teeth on a chainsaw designed to remove material in only one way. This chainsaw chain direction makes your chainsaw work effectively. To get effective results from chainsaws, pay great attention to them.

Putting the chainsaw chain in the right way makes the chainsaw work smoothly and is essential for your safety. It will also help prevent rookie mistakes and get the most out of your chainsaw. Keep the chain link at a bottom position to provide the exact amount of support for the chainsaw blade to move effectively. If the blade direction is faulty, you need to reset the chainsaw chain. By reversing the track of the chainsaw, it will generate a lot of smoke instead of doing actual cutting.

By oppositely mounting the direction, it may cause a lot of problems such as

Crack/ burn out the clutch
Wastage of bar oil
Damage the chain links
Motor deterioration
Because of this, you have doubts about your abilities
Causes unnecessary stress on the guide bar
May lead to damage to its body parts and users

When and how to remove a chain from a chainsaw?

If you feel unsafe using the chainsaw, then it is time to remove the damaged chain from the chainsaw. Are you in an emergency and want to do away with the emerging problems during your work? If the chainsaw is damaged and subdued, it will be hard to carry out in emergencies.

In this case, one has to change or sharpen the chainsaw before performing such risky tasks, and this will also be a time-consuming process. To prevent such irritating situations, the chainsaw chain should be accurately checked and replaced.

After figuring out the harmful chainsaw chain, then the other step is to expel it and supplant it with a good and proficient chain. This process is amazingly vital but not a tough assignment. There is a step-by-step direction to expel a chainsaw chain.

Pull chain break bar – discharges chain.
Undo jolts and evacuate them
Remove the side casing
Pull the bar absent from the chain tensioner
Lift the chain off
Make sure it is off the chins of the chain bar
Take off the clutch sprocket
Strip off the bar and out it the other way round

After removing a damaged or dull chain from the chainsaw, it takes less effort to cut the required material. It should be sharpened and removed timely to prevent further damage to the material and the worker. It is easy to operate a good chainsaw because a damaged chainsaw may ruin your materials. One can cut a huge variety of hardwood materials like hard maple, birch, beech, apple, apple, almond, oak, and ash without investing more energy.

Chainsaw chain direction: Which direction should it go?

Besides the power tools being very efficient and effortless, they are also handy. They require great care for their maintenance. It is very crucial to place the chainsaw chain direction right. If it is placed on the wrong track, it may lead to a significant problem and cut the required material.

OK, I know what you are thinking?

Are you curious about the direction in which the chainsaw chain goes? Do you want to learn how to?

Let me explain!

Whenever your chainsaw is on the left side of the engine, it should rotate in an anti-clockwise direction, and the edges should face away from the engine.

Here are some safety tips when changing a chain.

Chainsaw chains are sharp, so continuously utilize protective wears
Do not take off a saw running unattended
Avoid contact with the cloth; significant burns may happen
Do not carry chainsaws when they are running
Always utilize both hands to control the chain saw
When the chainsaw is on, never attempt to chains with it
Be exceptionally cautious not to trip over the line or cut through it
Plan your cutting technique
Keep the chain greased up
Constantly assess your chainsaw sometime recently beginning

Let’s move directly in the right chainsaw chain direction:

Set The Bar

One of the best ways to replace a chain on a chainsaw is that firstly remove the clutch cover and then reattach the chain on the chainsaw bar and tighten the bar nuts with a gauge. Now adjust it in a manner, so it will fit more loosely and not take so long to put on and set properly in the correct direction.

Check Blade Direction

The most important thing in replacing the chain from a chainsaw is to make sure that the blades are mounted correctly and facing the right direction (beware of the sharp edge of the blade). The correct blade direction is that it moves towards the bar tip that is away from the body part of the machine.

Tighten The Blade

After setting the chain on the chainsaw, tightening the blades and a chainsaw blade direction are the last and most crucial steps. The accurate direction and tightening with the help of tensioning screw make the chain run smoothly. Do not under and over tighten the blades. Because in both cases, your chain setting may become disturbed, and it will start disturbing during work.

Check out this video for proper guidance and in-depth detail if you find these steps difficult.

Signs a chainsaw chain is dull

If the chainsaw is dull, it will not work effectively so it’s time for chainsaw chain replacement. As to how much it is worst, it can be downright dangerous. But the question is, how will you recognize the dull chainsaw? I mention some signs below that may help you to identify your chainsaw when you find out these signs, then sharp or replace your chainsaw. Because a dull chainsaw utilizes more power and gives fewer results. Here are some signs that will help one to identify the defects of the chainsaw

The chainsaw starts to smoke despite being well lubricated
The chain will not create fine threads as it creates fine saw smoke
The chainsaw will not cut the wood properly as it has dull touring teeth on one side
The fine chainsaw needs less force to cut out the materials
A dull chainsaw requires a large amount of energy for its proper working
The dull chainsaw produces too much noise than usual. It creates a rattling noise when it is cutting material
A dull chainsaw is hard to use and chain tension lost
A dull chainsaw will slip out often rather than staying in one position.

When your chainsaw starts showing these signs inspect the bar and chain carefully. Try to avoid using such kind of dull chainsaw or replace the old chain with a new chain.

A dull chainsaw will damage and slow down your work. Compared to a dull chainsaw, a fine and sharp chain will make your work easy and quick. If the chainsaw maintains correctly, it will increase its life expectancy and lower the chances of its expiration date. Always clean the chainsaw properly after its use. This will keep the chainsaw safe.

Wrap up

Let’s recap!

Following the techniques above will ensure you keep the chainsaw chain pointed in the right direction. By keeping the direction correct, you can stay away from the emerging problems during work.

If you face any difficulty in your project, do not bother to worry about it. Feel free to ask any query regarding that problem.

Thank you for reading!

We have a lot more articles like this on our website, so check it out if you like it.

FAQ’s

Here are some of the FAQs related to chainsaw chain direction.

Q1: Why does my saw leak bar oil? And how do I prevent this leakage?

Ans: When the reservoir is full beyond its limit, it starts to leak. Always check the reservoirs before starting the chain to prevent the leakage of oil. Sometimes the guide bar lubricates too much, resulting in leakage of oil. If there is any damage to the filler caps like break-down of the seal or any fault, saw oil starts to leak. To avoid leakage, clean the chainsaw in case of excess lubrication, and clean up the sawdust and residues.

Q2: What protective gear is required for chainsaw operation?

Ans: To diminish the chances of damage, maintain a strategic distance from loose-fitting coats, and unconfined long hairs are limited. Clothing must be solid and snug-fitting. Wear an affirmed security hard cap to keep a strategic distance from heat damage. During working, the chainsaw produces a rattling sound.

Utilize resonate boundaries to secure your hearing. Heavy-duty, nonslip gloves make strides your hold and ensure your hands. Never work a chainsaw unless wearing goggles or appropriately fitted security glasses. Good balance is exceptionally imperative in chainsaw work. Wear strong boots with nonslip soles so merely work comfortably.

Q3: What do I get to know about chainsaw bars and chain oil?

Ans: Utilize high-quality bar oil for the oil of bar chains. The oil must be biodegradable and does not create any natural hazards. The oil ought to appropriately oil the chainsaw chain to prevent damage and be able to make it work effectively without any interference.

If the bar oil does not utilize, it’ll increment the chances of contact and create more warmth. The increment of warmth may break the chainsaw teeth. The bar oil increases the level of slickness. This feature helps spin the chainsaw speedily and moves at a fast rate.

Q4: How frequently does my chainsaw chain require sharpening?

Ans: Chainsaw chains are designed in such a way that they cut clean timbers. The point of how regularly a chainsaw gets overhauled depends upon the sort of fabric. On the off chance that you’re cutting soil, sand, shake, etc. The chainsaw will be gloomy instantly.

But in this case, as you’re breaking clean firewood, the chain will dull inevitably. So depending upon the condition, the chainsaw will sharpen in like manner. To induce the coming results about the chainsaw, it sharpens every year once you use the chainsaw for the season.

Q5: Why should I store the oil in a sealed approved holder?

Ans: Well, if you do not keep your oil in the sealed approved container. There are chances of its contamination with water. When the oil is contaminated with water, it will not combust and causes issues starting and also causing running problems. Water is heavier than water and will separate from the oil. Bar oil in a sealed container can also store for a couple of months without being contaminated.